Carbide tip used to drill pilot holes when installing anchors or 3/16 in Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.

5/8 PLUG CUTTER

Flute geometry removes dust from the hole quicker for fast drilling and long life. Shot peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. Chrome vanadium shaft through-hardened to 50-53 HrC. Fits all spline rotary hammers.

Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss, fits all SDS-plus and Hilti TE-C rotary hammers.

Quick, easy change-out in production use with S2 tool steel construction and a Rockwell hardness between 58-62. Used in high torque applications, 1/4 in hex drive.

Carbide tip used to drill pilot holes when installing anchors or 3/16 in Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.

The MILWAUKEE SHOCKWAVE Impact Duty 50PC Drill & Drive Set is engineered to be the Most Durable, Best Fitting driver bits on the market. The WEAR GUARD TIP delivers increased wear resistance which protects the impact bit's fit over the life of the bit. The SHOCK ZONE is optimized for each tip type and length of driver bit in the set to absorb peak torque and prevent breaking. The driver bits are made from CUSTOM ALLOY76 steel and a proprietary heat treatment process to extend bit life, providing up to 50X life versus other impact driver bits on the market. The Milwaukee SHOCKWAVE Impact Duty driver bits are built to provide users with extreme durability for the most demanding applications.

Made of high-grade S2 tool steel and milled for precise fit. Specifically built for the higher torque requirements of power tools, can be used with drill chuck or quick change chuck adapter in applications such as appliance, automotive, aviation, decking, drywall, electronics, furniture assembly, general construction and HVACR, 1/4 in hex shank.

Made of high-grade S2 tool steel and milled for precise fit. Specifically built for the higher torque requirements of power tools, can be used with drill chuck or quick change chuck adapter in applications such as appliance, automotive, aviation, decking, drywall, electronics, furniture assembly, general construction and HVACR, 1/4 in hex shank.

Premium-grade S2 tool steel. Durable composition equals longer bit life. Corrosion-resistant, black oxide coating provides lubricity and resists corrosion of the bit. Thicker web provides greater strength and longer life. Fast, accurate drilling. 135 deg split point tip starts on contacts to prevent walking, while the parabolic flute clears chips fast. 95-piece set includes one 1/16 in Thunderbolt black oxide drill bit, one 1/4 in Magnetic nut driver, one 1/4 in Thunderbolt black oxide drill bit one 1/8 in Thunderbolt black oxide drill bit, one 3/16 in Thunderbolt black oxide drill bit, one 3/32 in Thunderbolt black oxide drill bit, one 5/16 in Magnetic nut driver, one 5/32 in Thunderbolt black oxide drill bit, one 5/64 in Thunderbolt black oxide drill bit, one 7/64 in Thunderbolt black oxide drill bit, two Hex bit 1 in 1/16 in, two Hex bit 1 in 1/4 in, two Hex bit 1 in 3/16 in, two Hex bit 1 in 5/32 in, two Hex bit 1 in 9/64 in, two Hex bit 1 in 1/8 in, two Hex bit 1 in 3/32, two Hex bit 1 in 5/64 in, two Hex bit 1 in 7/64 in, one Magnetic drive guide, three Phillips bit 1 in P1, 10 Phillips bit 1 in P2, four Phillips bit 1 in P3, three Phillips bit 1 in PR2, one Phillips bit 2 in P2, one Pozidrive bit 1 in PZ1, one Pozidrive bit 1 in PZ3, two Slotted bit 1 in SL 1/4 in, two Slotted bit 1 in SL 1/8 in, two Slotted bit 1 in SL 3/16 in, two SL 7/64 in, two Slotted bit 1 in SL 9/32 in, one Slotted bit 2 in SL 3/16, three Square bit 1 in SQ1, eight Square bit 1 in SQ2, three Square bit 1 in SQ3, one Square bit 2 in SQ2, two Torx bit 1 in T10, two Torx bit 1 in T15, three Torx bit 1 in T20, three Torx bit 1 in T27, two Torx bit 1 in T30, two Torx bit 1 in T40, two Torx bit 1 in T9, one Torx bit 2 in T20, one Torx bit 2 in T25.

DeWalt's open design easy access tool carrier has 33 tool pockets and sleeves, a zippered main compartment, padded handles and abrasion-resistant rubber feet.

The SDS shank drill bit is designed for heavy-duty use in rotary hammer drills without any slippage, providing productive, high torque drilling. The carbide tip easily and efficiently drives through concrete and masonry. For use with 1-1/4 to 4 in fastener length.

Engineered for heavy-duty use in rotary hammers, the Tapcon SDS carbide drill bit easily drives through Concrete & masonry. The SDS eliminates slippage, providing for productive, high-torque drilling in Concrete and masonry. Seamlessly use Tapcon Drill Bits with Tapcon anchors to ensure drilling precise holes and achieve maximum holding power.

Used for drilling pilot holes in masonry including concrete, block, and brick
For best results, use with 5/16 in. Tapcon concrete anchors
Engineered to seamlessly work with Tapcon concrete screw anchors ensuring an accurate fit
Carbide tip increases strength and durability allowing for repeated use Tight bit tolerance provides maximum anchor performance
Designed for use with a rotary hammer drill with an SDS shank
Brazed tip helps resist overheating and longer tip life

1/2 PLUG CUTTER

High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length.